SET UP YOUR HOME HUB

Counter stand instructions

Follow these steps to securely mount your Home Hub. Flip through each card for detailed guidance.

1 of 4

The upper counter stand held upright over the lower stand, with arrows showing its screw holes lining up with the mounting holes below

Line it up

Level the lower counter stand and hold the upper stand steady. Align its screw holes with the mounting holes below, then keep everything in place for assembly.

2 of 4

A screwdriver tightening a screw through the base of the assembled counter stand

Secure the base

Fasten the base through all three holes with the KM3x4mm screws. Tighten them firmly with a screwdriver—but don’t overtighten.

3 of 4

The assembled counter stand upright with the power cord routed through it toward the back of the Home Hub

Stand up. Plug in.

Rotate the assembled counter stand upright. Route the power cord through the stand, then plug it into the device’s DC input.

4 of 4

The back of the Home Hub attached to the counter stand with screws, next to a front view of the device standing in landscape

Set it in place

Center the device on the desktop stand. To use in landscape mode, secure it with two KM4x6 screws for extra stability. To use in portrait mode, no screws are required.